Click image to view full size image
CW612100D CW612125D CW612140D CW612160D
UNIVERSAL LATHE AND GAP-BED LATHE
Horizontal lathe Models CW612100D, CW612125D, CW612140D, CW612160D.
Main features:
The lathe can perform to turn end -faces., cylindrical surfaces and internal holes of various parts as well as metric ,inch, module and pitch threads. The top slides may be operated individually by power for cutting shot taper, long taper can be turned automatically through the compound movement combining longitudinal feed with the top slide feed, moreover, the machines may be used for drilling, boring and trepanning .
They are characteristic of power, high spindle speed, high rigidity. The various ferrous and won-ferrous metals parts may be turned through the heavy cutting by carbon alloy tools.
`
SPECIFICATION |
Models | |||||
CW612100D | CW612125D | CW612140D | CW612160D |
| ||
CAPACITY | Swing dia. over bed | 1000 | 1250 | 1400 | 1600 |
|
Swing dia. over cross slide | 630 | 880 | 1030 | 1030 |
| |
Swing dia. on gap | 1450 | 1700 | 1850 | 2050 |
| |
Width of bed | 755mm | |||||
Max. workpiece length | 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000 | |||||
SPINDLE | Spindle nose | A15 | ||||
Spindle bore diameter | 130mm | |||||
Taper of spindle bore | metric 140# Metric No. 140 | |||||
Range of spindle speed | 3.15-315r/min 21 kinds | |||||
FEEDS | Longitudinal feeds range | 0.1-12mm/r 56 kinds | ||||
Transversal feed range | 0.05-6mm/r 56kinds | |||||
Metric tread range | 1-120mm 44kinds | |||||
Inch tread range | 3/8-28teeth/inch 31kinds | |||||
Modular thread range | 0.5—60mm 45kinds | |||||
Pitch thread range | 1-56teeth/inch 25 kinds | |||||
TAILSTOCK | Tailstock center taper | Morse No.6 | ||||
tailstock center motion | 300mm | |||||
Tailstock center diameter | 140mm | |||||
MOTORS | Main motor power | 22kw | ||||
rapid motor power | 1.5kw | |||||
Cool pump power | 0.125kw | |||||
STANDARD ACCESSORIES
1 Four-jaw chuck φ1000 1set | 4. center 1pc | 7 I set Foundation screws 1set |
2. steady support(for more than 2m) 1 set | 5 center bush 1pc |
|
3. following support (for more than 2m) 1 set | 6. tools 1set |
|
Special accessories
1. (φ400-φ700) Steady support | 5. Chasing dial device |
2.φ1250 4-jaw chuck φ1250 | 6 Inch leadscrew |
3. Metric dial device |
|
horizontal lathe
